Publicité
Les langues disponibles
Les langues disponibles
OPERATING FROM THE CONTROL PANEL
TURNING THE APPLIANCE ON/OFF
HIGH
Before plugging the appliance check the cap on back of
%
the unit are correctly inserted on drainage hose A10
Plug the appliance into the mains. Two lines appear on the dis-
play indicating that the appliance is in stand-by and the buttons
and
light on.
LOW
Touch
button (C1) to switch the appliance on.
When turned on, the air conditioner starts operating in the same
mode as when it was turned off.
LOW
Note: If you don't switch on the appliance, after a few minutes, the
and
buttons switch off and the display fades to reduce en-
ergy consuption.
To turn off the appliance, touch the
the appliance.
Perfect!
Note: Never switch off the appliance by unplugging it: always
the
button, wait a few minutes and then unplug. Doing
Perfect!
so, the appliance will run a check of the operating conditions.
FUNCTION
REAL FEEL is the innovative De'Longhi technology that works
simultaneously on temperature reduction and humidity control,
securing best comfort level.
With traditional systems, during working time, optimal comfort
conditions may be reached but not secured over time. With REAL
FEEL, once optimal comfort is reached, PAC automatically modu-
lates compressor action and fan speed, to keep it over time.
To activate the function, touch
HIGH
°C/°F
button, then unplug
button.
HIGH
MEDIUM
LOW
REAL FEEL light (C9) changes color when approaching the best
comfort level (see following diagram).
ORANGE LIGHT: Room conditions far
from optimal level.
GREEN LIGHT: Most people feel good
room conditions, near optimal level.
Perfect!
BLUE LIGHT: Best comfort level.
Perfect!
•
The well-being feeling is a subjective condition: for this
reason, different people may judge differently the same
environmental conditions.
•
In particularly severe environmental conditions (large size
of the environment, high temperature or humidity outside,
poor insulation of the room, too many of people or strong
heat load in the room, strong exposure to the sun ...) this
device may not be able to reach the best comfort level.
AIR CONDITIONING MODE
When using the appliance in this mode, the air exhaust hose
(B2) has to be connected.
Ideal for hot muggy weather when you need to cool and dehu-
midify the room. To set this mode:
• Touch repeatedly the MODE button until the conditioning
suymbol is displayed: the display shows the desired
temperature.
•
Press + (C4) or - (C5) buttons to adjust the desired tem-
perature.
8
Operating curve
TEMPERATURE
Publicité
