Infraworld Saunacontrol C4 Notice De Montage Et D'utilisation page 32

7.4. Combination of the various operating modes
Possible combinations of operating modes:
1. Sauna + radiator:
Select the operating mode "sauna" and switch the infrared radiators on with the control.
2. Evaporator + radiator + heater as additional heating (via cabin temperature control):
Select the operating mode "evaporator" and switch the infrared radiator on with the control.
3. Radiator + heater as additional heating (via cabin temperature control):
Select the operating mode "radiator" and switch them on with the control. The heater as additional heating runs
automatically.
Switch off the heater as additional heating:
Do you want to switch off the additional heating in the combination 3 ?
To do so, it is necessary to lower the cabin temperature. In this case, the factory adjusted cabin temperature is
50 °C.
Press the -button once. The display shows "temperature" - the desired cabin temperature is adjusted by the
plus or minus button. It can be lowered in one degree steps, e.g. from 50 °C to 30 °C.
7.5. Adjusting and regulating the VITALlight infrared radiators
The VITALlight infrared radiator intensity can be continuously adjusted by a rotary knob from OFF, 40 to 100%.
Connection possibilities:
- 1 control max. 2 x 500 W
- 2 controls each max. 500 W (the second control can be ordered optionally - item no.: B6687)
EN
32