6.2. Select the operating mode:
Press the
-button
Start sauna
(80 °C)
M = Select, light
Start Bio
(50 °C 45 %)
M = Select, light
Start radiator
(70 % 90 %)
M = Select, light
Blower
( OFF )
-/M/+ = change
Prog. pre-select
( OFF )
-/M/+ = change
Max. oper. time
EN
( 2:00:00 )
-/M/+ = change
28
Operating mode "sauna"
5
Adjusted temperature 80 °C
If a button is not pressed for 5 seconds, it will start operating in the
selected operating mode (counter displayed on the right at the top).
Attention: It is not possible to change from one operating mode to
another during sauna operation! If this is desired, the cabin must be
switched off first and then restarted.
5
Operating mode "evaporator"
Adjusted temperature 50 °C and relative hum. 45 %
5
Operating mode "infrared radiator"
The left power regulator is set to 70 % and the right one to 90 %.
If only one regulator is connected, only one value is displayed.
Operating mode "blower"
Display only shown with active blower function = YES
(see item 6.4)
hold the MODE button down for 2 sec.
(while counter display greater than 0)
Max. operating time according to STANDARD EN60335-2
private operation 6 hours
commercial operation 12 hours