Infraworld Saunacontrol C4 Notice De Montage Et D'utilisation page 30

6.6. Displaying operating statistics
Operating statistics are shown by holding down the
(when the sauna is off, standby).
oper. hrs:
S 102:12
B 102:12
I 18:00
Heater Heating time
Exit by pressing the
To change the basic setting, the sauna must be activated in the respective operating mode (sauna, evaporator,
radiator).
Generally you can select the adjustable factors by pressing the
button, the adjusted settings are stored and the sauna changes to normal operation.
7.1. Adjusting the operating mode sauna
The sauna operating mode is enabled in the cabin (see section 6.2).
Temperature:
1 x The display shows "Raum-Temp." (cabin temp.) - the desired temperature is adjusted by the Plus-
or Minus-button. Temperature adjustment is made in one degree steps between 30 and 110 °C.
Blower: [ only with blower function = YES] (see section 5.2).
2 x The display shows "blower". Use the Plus-button to switch the blower on and the
Minus-button to switch it off.
EN
30
Total operating hours
426:59
(hrs., minutes)
218:48
187:02
21:09
Operating hours
-button
7. CHANGING THE OPERATING VALUES
-button and by briefly pressing the
-button. After 5 seconds without pressing a
-button