Infraworld Saunacontrol C4 Notice De Montage Et D'utilisation page 27

Display in the operating mode
Operating mode:
Sauna
Bio-Sauna
Radiator
Bio
Drying
Rel. humid: 48 %
Temp.:
Current humidity
in the cabin
6.1. Switching on the sauna
6.1.1. Starting the sauna
After pressing the -button, the start screen appears on the display.
6.1.2. Starting the sauna with activated child lock
If the display shows „L O C K E D" when the sauna is switched on
The child lock function can be deactivated by holding down the Plus- and Minus-buttons and briefly pressing the
-button. The child lock is automatically enabled again when the sauna is switched off.
6.1.3. Possible operating modes
Select the operating mode by pressing the
- 1x for sauna
- 2x for evaporator
- 3x for infrared radiator
- 4x for blower [only active with blower function = YES] (see section 5.2)
After the countdown time has expired (counting down from 5 to 0 on the top right-hand side of the display), the
selected operating mode is enabled. The sauna starts with the last values set.
Infrared radiators can be connected via the rotary buttons in any operating mode.
To access the programming mode, hold down the
(see section 8. Preselection).
6. OPERATION
Term
1:25:32
50 °C
(mode)
Current temperature
of cabin
-button several times:
, the child lock is active.
-button for 2 sec. (before the countdown time reaches 0)
EN
27