Infraworld Saunacontrol C4 Notice De Montage Et D'utilisation page 29

6.3. Switching on the sauna light
6.3.1. Sauna light during operation
The sauna light is switched ON or OFF by pressing the
6.3.2. Sauna light for cleaning
Switch on with the -button (the start screen appears).
The light can now be switched ON or OFF with the
6.4. Blower - continued work
This display is only shown with active blower function = YES (see section 5.2).
Switch on with the
„blower" is shown. Use the
Each time the -button is pressed, the operating time increases by 15 minutes
(the Minus-button decreases the operating time by 15 minutes). A maximum of 60 minutes is possible.
The controls switch off automatically after the set time has expired.
By pressing the or
6.5. Switching off
When the set time is complete, the control switches off automatically.
6.5.1. Post drying at evaporator mode
The evaporator mode starts a drying period of 30 minutes at 80 °C (display shows "dry"). The blower is
switched on in the drying phase (with active blower function = YES).
Press the -button to switch off during operation or drying.
6.5.2. Switching off the evaporator sauna during operation:
1 x -button... Start drying mode (30 min, 80 °C)
2 x -button... Return to start screen
3 x -button... Control is switched off (standby)
6.5.3. Switching off the other operating modes:
1 x -button... Return to start screen
2 x -button... Control is switched off (standby)
-button (the start screen appears). Push the
-button to switch on the blower.
-button, the blower program is also terminated.
-button.
-button.
-button several times until
EN
29