Infraworld Saunacontrol C4 Notice De Montage Et D'utilisation page 26

5.1. Changing display language
Saunacontrol C4
-----------------------------------
Infraworld
M=Select, Light
You can change the language with the
(when the sauna is switched-off, standby).
** LANGUAGE**
---------------------
English
+ Change, M Exit
Change the language by pressing the
Confirm by pressing the
5.2. Activate blower function (if needed)
You can set the ventilator function with the
(when the sauna is switched-off, standby).
** Blower **
---------------------
Ja
+ Change, M Exit
You can switch it on or off with the
(Note: By pressing the
EN
5.3. Activate the child lock function
The blower function (see section 5.2) leads you to the function „Activate the child lock".
You can switch it on or off with the
26
5. BASIC SETTINGS
V5.2f This setting on the display is called programming mode.
-button held down and by briefly pressing the
-button (German → English → German...).
-button.
-button. Confirm by pressing the
-button you automatically switch to the function „Activate the child lock").
-button. Confirm by pressing the
-button held down and by briefly pressing the
-button
-button
-button.
-button (see also section 6.1.2).