Bibby Scientific Stuart SMP11 Mode D'emploi page 2

English
Heating controller
Fig 1
MELTING POINT
APPARATUS
SMP11
Thank you for purchasing this Stuart product.
To get the best performance from the
equipment, and for your own safety, please read
these instructions carefully before use. (For an
illustration of the controls, see Fig 1).
IEC connector
Lens
Safety advice before use
This equipment is designed to operate under the
following conditions: -
❖ For indoor use only
❖ Use in a well ventilated area
❖ Ambient temperature +5°C to +40°C
❖ Altitude to 2000m
❖ Relative humidity not exceeding 80%
❖ Mains supply fluctuation not >10%
❖ Overvoltage category II IEC60364-4-443
❖ Pollution degree 2 IEC664
❖ Use with a minimum distance all around of
Capillary tube
200mm from walls or other items
If the equipment is not used in the manner
described in this manual the protection
provided by the equipment may be
impaired.
Thermometer
Thermometer
support