Samsung NX58560 Serie Mode D'emploi page 63

Surface burner grates and assemblies
5. Replace the control knobs in the OFF
position by pushing them straight onto
the control valve stems.
1. Turn off all controls and make sure all
parts have cooled.
2. Lift off and remove the burner grates
from the cooktop. Make note of the
burner sizes and locations of all the
surface burners.
3. Lift off burner caps from top of the
burner heads.
4. Lift the burner heads off the valve
manifolds and starter electrodes.
5. Clean all removable burner parts in
warm, soapy water. Do not use steel-
wool pads or abrasive cleaners on any
burner part.
6. Rinse thoroughly and completely dry all
parts before they are reassembled.
NOTE
Starter electrodes are not removable and
should only be wiped clean when the
controls are in the OFF position.
English 63