Samsung NX58560 Serie Mode D'emploi page 61

NOTE
Do not spray the gliding rack with cooking spray or other lubricant sprays.
4. Shake the graphite lubricant before
opening it. Starting with the left (front
and back) slide mechanism of the rack,
place four (4) small drops of lubricant
on the two (2) bottom tracks of the slide
close to the bearing carriers.
5. Repeat for the right (front and back)
slide mechanism of the rack.
6. Open and close the rack several times to
distribute the lubricant.
7. Replace the cap on the lubricant and
shake it again. Turn the rack over and
repeat steps 3, 4, 5 and 6.
8. Close the rack, turn rack right-side-up
and place in the oven. See installing the
gliding rack in the Using the gliding rack
section.
Oven racks
To keep racks shiny and looking like new, remove racks from the oven and clean
by hand in hot, soapy water with a plastic or soap-filled scouring pad.
Oven
Racks
CAUTION
Do not leave the oven racks in the oven during a self-cleaning cycle. The extreme
heat in the self-cleaning cycle will permanently discolor the oven racks and make
them difficult to slide.
If racks become difficult to slide, rub the side rails with wax paper or a cloth
containing a small amount of cooking oil. This will help the racks slide more easily
in the tracks.
English 61