S&P TERMOTECH-TS CE260N Manuel D'installation page 12

CE260N, CE540N, CE540P
Control apparatus for TS200/03, TS200/04, TS200/06,
TS200/07, TS200/12 and TS200/14 radiant panel kits
CHaraCterIstICs
Ce260N
- Control unit power supply: three phase 400V with neutral and earth.
- Control apparatus for mounting TS200/03 (CE260N + 3 panels TERMOTECH TS200) and
TS200/04 (CE260N + 4 panels TERMOTECH TS200) kits.
- Maximum power output per phase, limited by a 50A three-pole switch with 6000A
breaking capacity in a C curve.
- Protection rating: IP55.
- Power supply for series of radiant panels: of 50 to 250V cc.
- Maximum direct current output in steady state: 50A.
Ce540N
- Control unit power supply: three phase 400V with neutral and earth.
- Control apparatus for mounting TS200/06 (CE540N + 6 panels TERMOTECH TS200) and
TS200/07 (CE540N + 7 panels TERMOTECH TS200) kits.
- Maximum power output per phase limited by 50º three-pole switch with breaking capacity
of 6000 A in curve C.
- IP protection rating: IP55.
- Power supply for series of radiant panels: of 50 to 500V cc.
- Maximum direct current output in steady state: 50A.
Ce540P
- Control unit power supply: three phase 400V with earth.
- Control apparatus for mounting TS200/12 (CE540P + 12 panels TERMOTECH TS200) and
TS200/14 (CE540P + 14 panels TERMOTECH TS200) kits.
- Maximum power output per phase, limited by a 50A three-pole switch with 6000A
breaking capacity in a C curve.
- Protection rating: IP55.
- Power supply for series of radiant panels: of 50 to 500V cc.
- Maximum direct current output in steady state for each channel: 50A.
PUrPOse
This unit is for controlling the electrical power
supply to a series of radiant heating panels.
It works via a power regulation system
which enables radiant heating panels to be
incrementally added in accordance with their
resistance to temperature increase.
It provides switching without disturbances or
spikes to the electricity network.
12