Miele PFD 402 Mode D'emploi page 53

Installation and connection
Before commissioning, the dishwasher must
be securely installed, and the water inlet and
drain hoses and the mains cable correctly
connected. Follow the instructions in "In-
stallation", "Water connection" and "Elec-
trical connection" as well as the installation
plan.
Procedure
The commissioning process follows a set
procedure which cannot be interrupted.
Switching on
Press the  button.

Selecting a language
Commissioning starts with the selection of
the display language.

Language
english
dansk
deutsch español
Scroll to the language you want and select

it by tapping on it.
08:15
français
(GB)
hrvatski
en - Commissioning
WiFi setup
In the next step, you can connect your dish-
washer to the WiFi network.

Network/WiFi
Set up WiFi?
No
Select if you do not want to integrate
No

the dishwasher into the WiFi network or
want to do it later.
If you select , the next steps will guide
Yes

you through the process to set this up.
Please refer to "Further settings, Network-
ing/WiFi".
Setting the date

Date
2024 August
2023
June
2022
Set the date. The order of year, month and

day is the same regardless of the date
format set.
Press to save the setting.
OK

08:15
Yes
08:15
11
July
10
09
May 08
April
07
OK
53