Publicité
Les langues disponibles
Les langues disponibles
assembly
mounting island hood
8. Fit the wall bracket using the 2 screws.
6
9. Connect the telescopic pipe to the extractor hood using
the screws supplied (5).
5
10. Lift the telescopic pipe up and fit this to the wall bracket
using the 2 screws (6).
1. Determine the position of the wall bracket with respect
to the hob and mark off the mounting holes (1).
2. Drill the mounting holes and secure the ceiling bracket
with the screws and plugs supplied.
3. Secure the sidepieces of the extractor hood with
2 screws to the top plate of the motor housing (2) and
secure the underside of the extractor hood to the
underside of the sidepiece (3) with another 2 screws.
2
3
GB 11
Publicité
