Publicité
Les langues disponibles
Les langues disponibles
maintenance
general
Clean the extractor hood at least once a month. Good
maintenance of the metal grease and carbon filters is
essential for the proper functioning of your extractor hood.
outside
The stainless steel on the outside of the hood can be
cleaned with soapy water and a damp cloth. The stainless
steel will regain its shine if you occasionally use a stainless
steel care product or polish. The polish imparts a dirt-
resistant layer to the stainless steel. Always clean the
stainless steel in the direction of polishing.
ATAG has developed a range of cleaning agents called Atag
Shine.
Never use abrasive cleaning agents, green scouring pads,
other scourers or polishing cleaning products (such as liquid
scourers).
Never use caustic cleaning agents. These can cause
stainless steel to discolour.
metal grease filters
Clean the grease filters at least once a month. You can clean
the grease filters in the dishwasher To prevent possible
fouling of the grease filters with food leftovers, we
recommend washing them separately. Do not use any soap
or other cleaning agent, as this may discolour the grease
filter.
The filters must be placed in your dishwasher horizontally,
so that the water can thoroughly penetrate the filters and to
enable them to dry easily.
GB 5
Publicité
