Publicité
Les langues disponibles
Les langues disponibles
INSTALLING THE DISHWASHER
Be sure that you or your installer follow these instructions closely so that the new dishwasher works
properly and that you're not at risk of injury when washing dishes.
Step 1 Check The Parts And Tools
Before starting on the installation, prepare all the necessary tools and parts required to install the
dishwasher. This will save installation time and simplify the installation process.
Parts Required
Provided with the dishwasher. Check when you unbox the dishwasher in Step 5.
Installation brackets
X2
Kick plate
Twist on wire
connector
Hot water supply line
Air gap
For the hot water supply line ? We strongly recommend using copper tubing with a compression fitting or a flexible stainless
steel braided hot water supply line.
Do not use plastic tubing. Plastic tubing can deteriorate over time and cause a leak inside the tube fitting.
ST3.5*9 X2
(For the installation
bracket)
Condensation strip
Strain relief
90° Elbow
Rubber connector
ST3.9*13 X2
(for the kick plate)
Adjustment cap X2
Electrical tape &
Standard duct tape
Tube fittings
Hose clamp
ST4*14 X2
(For installation
Brackets)
Cable Tie
(for the drain hose)
Power cable
Teflon tape or sealing
compound
Publicité
