Publicité
Les langues disponibles
Les langues disponibles
INSTALLING THE DISHWASHER
Plumbing
1. Check the hot water connection on the front left-side of the base of the dishwasher. The mounting
plate should be secured to the front of the base, the threads inside the connection should be smooth
and shiny, and the area should be clean and free of any debris.
2. Check the plastic Brake and Sensor cases to ensure these assemblies are not cracked and that all
connections are secure.
3. Check the drain hose for any holes or deformities that could allow a water leak during draining.
Electrical
1. Confirm the junction box cover is secured to the junction box on the front right-side of the base of the
dishwasher.
2. Confirm the electrical box was not damaged during shipping and that it is secured to the base of the
dishwasher.
Appearance
1. Confirm there are no dents or scratches on the front of the dishwasher
2. Check the edges of the doors for any roughness or cracking
3. Check the control panel to ensure it is clear and unscratched, and that all the control markers are in
their proper places.
Parts
1. Confirm you have all the parts listed in Step 1 an page 6.
Publicité
