Publicité
Les langues disponibles
Les langues disponibles
Step 5 Unpacking And Inspecting The Dishwasher
Iunbox the dishwasher in an open area free of obstruction both around the carton and overhead. We recommend
that you retain the carton and all of the packing materials until the dishwasher is fully installed and operational to
ensure you have removed all the product's components from the carton prior to disposal.
Unboxing
1. Unbuckle or cut the four straps securing the carton top.
2. Lift the top of the telescoping carton clear of the carton tray and the contents, and then turn it over and
place it on the floor.
3. Put the straps and all of the packing materials from around the dishwasher inside the carton top,
inspecting them for any signs of damage.
4.
Locate and set aside the dishwasher's kick plate. The Kick plate is attached to packing material of the
dishwasher.
5. Lift the dishwasher from the carton tray, and then place it on the floor. Put the tray into the carton top.
6. Remove the bag that protects the dishwasher during shipping.
ALWAYS LIFT THE Dishwasher TO MOVE IT. Sliding it over rough surfaces can damage the dishwasher's
feet and sliding the feet over finished surfaces can, in some cases, damage that finish or the underlying
surface.
7. There is also packing inside the dishwasher that you may want to leave in place until the dishwasher is
installed.
8. DO not, under any circumstances, remove the sound-absorbent padding that surrounds the exterior of
the tub of the dishwasher.
Inspecting
Mechanical
1. Check the plastic base assembly to ensure that it is intact
2. Check the dishwasher's feet to ensure they are in place and can be adjusted so you can level and secure
the dishwasher.
3. Check all the visible components on the bottom of the dishwasher to ensure they are intact and secure.
4. Check the door latch, the operation of the hinges, and confirm the door is properly secured to the
dishwasher.
Publicité
