Signature STI2B/2 Manuel D'utilisation page 52

WARNING
Risk of cutting.
Be careful of cutting edges.
End parts in foamed plastic - be careful.
During transportation these could cause slight injury or cuts.
Remove the material and envelope of documents from the packaging.
Befire proceeding with installation read the work instructions carefully.
Step.1
Put a towel or cloth on the work surface.Place the hob face down on the
protected surface.
Step.2
Do not use silicone.
Step.3
Use the screws to fasten the four brackets, centre the hob in the space cut
out of the work surface.
EN-17