Télécharger Imprimer la page

Thermador Professional HPIN54WS Instructions D'installation page 18

Masquer les pouces Voir aussi pour Professional HPIN54WS:

Publicité

Les langues disponibles

Les langues disponibles

en-us Installer checklist
5.8 Installing the grease trays and filters
IMPORTANT: DO NOT use the cooktop, rangetop, or
range while the hood is disassembled.
Island hood
HPINxxWx
1
2
5
Hood canopy
1
Telescopic flue
2
Touch control panel
3
LED lights
4
Baffle filters
5
Grease trays
6
Grease tray trough
7
Filter spacers
8
Installing the filters and grease trays
Turn the fan and lights off.
1.
Remove all plastic from hood pieces.
2.
Insert the grease tray in rear tray. Push the grease tray
3.
in and down inside the grease tray trough. Grease trays
must be in place before installing the filters.
18
3
4
6
7
8
Install the filters. Start with an outside filter. Grab the
4.
filter by the handle, if applicable, or by the sides. Do not
place fingers inside the filter slats. Slide the filter up,
toward the front of the hood, then push down on top of
the grease tray.
Install the filter spacers. If applicable, insert the filter
5.
spacers on the left and right ends. Push up, slide
toward the front of the hood, then push in at the bottom.
To remove the filters and grease trays, ensure the filters
6.
are cool and grease has congealed. Then proceed in
reverse order of the previous instructions.
6 Installer checklist
Installer checklist
Final check
Installer checklist
Specified clearances maintained to cabinet
surfaces.
Appliance is level.
All packaging material removed.
Proper ground connection.
Owner is aware of location of the main circuit
breaker.
INSTALLER: Write the model number and serial
number in the Use and Care Guide. Leave the Use
and Care Guide and Installation Guide with the
owner of the appliance.
To clean and protect exterior surfaces
Clean the stainless steel surfaces by wiping with a
¡
damp soapy cloth. Rinse with clear water and dry with a
soft cloth to avoid water marks. Remove fingerprints
and smears with mild glass cleaner.
To polish and protect stainless steel, apply a stainless
¡
steel conditioner with a soft cloth. The Thermador
Stainless Steel Conditioner is available for purchase in
the online accessories store (US only)
www.thermador.com/us/accessories. Order part number
00576697 (spray bottle) or 17002200 (wipes).
Do not use conditioner on non-steel surfaces, logos,
¡
control markings, labels, black or smudge-proof
stainless steel, and appliance interiors.

Publicité

loading

Ce manuel est également adapté pour:

Professional serieProfessional hpin42ws