Thermador Professional HPIN54WS Instructions D'installation page 17

Hook up the wire harness connector inside the bracket
5.
to the terminal on the back side of the remote control.
Use either terminal.
Snap the remote control into the bracket.
6.
5.7 Installing the telescopic flue
Wrap the two (2) longer of the telescopic flue pieces
1.
around the support frame of the installed island hood.
The two pieces should click together. There are no
2.
screws needed.
Secure the upper flue to the support frame with two (2)
3.
½'' (25.4 mm) screws in the left and ride sides.
Wrap the two (2) shorter of the telescopic flue pieces
4.
around the upper flue. The two pieces should click
together. There are no screws needed. The island hood
will support the bottom flue.
Installation en-us
17