Chauvin Arnoux N93 Notice De Fonctionnement page 39

MiniFlex MA194 1000 mm
„ Dimensions (L x W x H)
„ Cord
„ Weight
AmpFlex ® A193 450 mm
„ Dimensions (L x W x H)
„ Cord
„ Weight
®
AmpFlex A193 800 mm
„ Dimensions (L x W x H)
„ Cord
„ Weight
®
AmpFlex A196A 610 mm
„ Dimensions (L x W x H)
„ Cord
„ Weight
Protection index
„ IP20 for the clamps E94 and MINI94, according to IEC 60529.
„ IP 40 for the clamps MN93, MN93A, C193 and PAC93, and IP 30 jaws open,
according to IEC 60529
„ IP 50 for the MiniFlex MA193 and for the AmpFlex
in operation
„ IP 67 for the MiniFlex MA196 and MA194, and the AmpFlex
IEC 60529 when the ring is screwed on
„ IK 04 according to IEC 62262.
Drop test: according to IEC/EN 61010-2-030 or BS EN 61010-2-030.
3.3. CONFORMITY TO INTERNATIONAL STANDARDS
Electrical safety according to IEC/EN 61010-2-032 or BS EN 61010-2-032.
Maximum appliable voltage:
„ MN93, MN93A, PAC93, E94, MINI94: 600 V category III or 300 V category IV
„ C193, MiniFlex, AmpFlex
„ AmpFlex
®
A196A: 1000 V category IV
Type of current sensor as per IEC 61010-2-032:
„ MN93, MN93A, C193, PAC93, E94, MINI94: type A
„ MiniFlex, AmpFlex
approx. 370 x 320 x 18 mm
3 metres long
approx. 160 g
approx. 170 x 158 x 25 mm
3 metres long
approx. 220 g
approx. 280 x 265 x 25 mm
3 metres long
approx. 270 g
approx. 215 x 200 x 25 mm
3 metres long
approx. 250 g
®
A193: 1000 V category III or 600 V category IV
®
: type B
® A193 according to IEC 60529
39
®
A196A according to