Ego Power+ TR4200 Manuel De L'opérateur page 6

4. Disconnect both blade motor cables (Fig. 2).
5. Place a rug or a mat (similar in size to that of the deck) under the deck to prevent the damage to the deck.
6. Remove the cotter pins and push the shaft pins out. Save both sets for deck re-assembly (Fig. 2).
7. Push the deck backward (towards the rear wheels) and rotate the suspension linkage clockwise to release it from
the deck hooks (Fig. 2).
2
Right side
8. Pull the rug/mat (with the deck on it) sideways to remove them
from under the tractor (Fig. 3).
9. Flip the deck on the ground so that the blades face upward.
6
GRASS BAGGER KIT — ABK4200T
c
Suspension Linkage
a
Motor Cable
2.4-2.6Nm
(Wrench Required)
3
Blade Motor
Deck Hook
Deck
Cotter Pin
b
Shaft Pin
Left side