Ego Power+ TR4200 Manuel De L'opérateur page 10

WARNING: Use of this product with improperly
secured bolts could result in serious personal injury.
6. Open the cover of the grass bagger by pushing the
cover handle in first and then lifting the cover handle,
then install both grass bags onto the top cover
assembly by inserting the front edge in first, and
then setting the back edge down until it fits into the
assembly as shown in Fig. 14.
7. With the side discharge chute of the tractor raised up
and held open, install the lower chute tube assembly
on the tractor by following these three steps (Fig. 15):
a. Insert the mounting plate into the attachment slot of
the tractor.
b. Align the supporting plate on the tractor with the slot of the mounting holder and insert in it.
c. Stretch the spring hook to secure it to the catch hole of the tractor.
15
Catch Hole
10
GRASS BAGGER KIT — ABK4200T
Side Discharge Chute
b
c
Spring Hook
14
Mounting Holder
Supporting Plate
Attachment slot
Mounting Plate
a