Ego Power+ TR4200 Manuel De L'opérateur page 12

OPERATION
When both grass baggers are full, place the electric lawn tractor on
a firm and level surface and set the parking brake. Stop the motors
and remove the safety key to prevent unintended starting.
1. Open the cover of grass bagger by pushing the cover handle
in first and then lifting the cover handle (Fig. 20).
2. Remove both bagger assemblies by lifting the front edge up
first, and then sliding the back edge forward and up until it is
clear of the frame (Fig. 21).
3. Empty the grass clippings at a proper disposal site.
4. Replace both bagger assemblies and close the cover. Restart
your tractor to resume cutting your grass.
When the grass clippings are blocked in the chute tube, place the
electric lawn tractor on a firm and level surface and set the parking
brake. Stop the motors and remove the safety key to prevent
unintended starting.
1. Stretch the rubber buckle to unlock the upper and lower
chute tube (Fig. 22).
2. Hold the tube handle to slide out the upper chute tube. Grab
the tube handle to pour out the clogged grass clippings at a
proper disposal site (Fig. 22).
3. Replace the upper chute tube assembly. Restart your tractor
to resume cutting your grass.
12
GRASS BAGGER KIT — ABK4200T
20
21
b
22
Tube Handle
a
c
b
b
a
a