Publicité
Les langues disponibles
Les langues disponibles
2
English
EagleEye™ UV-A/White Light LED Inspection Kit
Part No. EK-3000
INTRODUCTION
The EagleEye™ EK-3000 inspection kit contains the EE-365 lamp, a palm-sized, versatile,
hands-free light source featuring two ultra-high intensity UV-A LEDs for NDT testing, plus a
three-LED white light assembly for general inspection. In addition, the kit contains a unique
lamp mount/sprayer that allows the lamp to be mounted together with a penetrant can for
single-handed NDT yoke inspection, and an adjustable strap so the lamp can be worn
on a helmet or directly on the head for hands-free operation. The EagleEye EK-3000 is
ideal for fluorescent magnetic particle and penetrant testing, mining inspection and other
specialized applications.
FEATURES
•
Instant-on operation. Reaches full UV-A intensity immediately.
•
100,000-hour LED service.
•
Built-in fan keeps light source cool to maintain optimum UV-A intensity during extended
use.
•
Splash guard with integral particulate filter protects UV-A LEDs and fan from damage.
•
Powered by one rechargeable lithium-ion battery (installed). Provides up to
75 minutes of continuous inspection between charges
The EagleEye EK-3000 also includes one spare battery, a battery-charging cradle with
AC and DC cord sets, one replacement splash guard with integral particulate filters,
UV-absorbing spectacles, a lanyard and a soft carrying case.
UV light emitted from this product. Avoid eye and skin exposure to unshielded products.
FOR PROFESSIONAL EXAMINATION USE ONLY
IMPORTANT SAFETY INSTRUCTIONS
•
Do not operate the lamp if it has been damaged.
•
Do not look directly into the UV light. Wear UV-absorbing protective eyewear
(such as the UVS-30 glasses provided) when operating this or any UV lamp.
Never operate the lamp with the UV filter lens removed.
•
Never use this equipment in any manner not specified in these instructions because
your protection may be impaired.
CHARGING AND USE
The EagleEye EE-365 lamp is available with a charging cradle and AC and DC cords
for charging. See Replacement Parts.
•
Fully charge the batteries before first use.
•
Place one to two batteries in the battery charging cradle (AC and DC cords supplied)
and connect the plug to the appropriate power source. The light on the battery charger
will show green when charged and red when the battery is low. A full charge for two
batteries will take approximately four hours.
•
Turn the knob on the side of the lamp to open the battery compartment. Insert one Li-
on battery, positive end down (button to button), and close the compartment. The two
charged batteries will serve as backups.
•
The lamp will operate for up to 75 minutes on a fully charged battery. When the green
light on the lamp begins blinking from green to red it is time to replace the battery.
•
Press the rocker switch on the opposite side of the lamp (l = white light), (ll = UV light),
(O = off).
WARNING
(Read all instructions)
3
Publicité
