Publicité
Les langues disponibles
Les langues disponibles
Installation
Adjusting the Feet
4.2.
If the product stands unbalanced after
installation, adjust the feet on the front
by rotating them to the right or left.
Electrical Connection
4.3.
WARNING: Do not make
connections via extension
cables or multi-plugs.
WARNING: Damaged
power cable must be
replaced by the Authorized
Service Agent.
If two coolers are to be
installed side by side, there
should be at least 4 cm
distance between them.
• Our company shall not be liable
for any damages that will arise
when the product is used without
grounding and electrical connection
in accordance with the national
regulations.
• Power cable plug must be within easy
reach after installation.
• Do not extension cords or cordless
multiple outlets between your
product and the wall outlet.
Refrigerator/User Manual
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant
pipes to improve the cooling
system. Refrigerant with
high temperatures may
flow through these areas,
resulting in hot surfaces
on the side walls. This is
normal and does not need
any servicing. Please pay
attention while touching
these areas.
Attaching the
4.4.
plastic wedges
Use the plastic wedges in the provided
with the product to provide sufficient
space for air circulation between the
product and the wall.
1. To attach the wedges, remove the
screws on the product and use the
screws provided with the wedges.
2. Attach 2 plastic wedges on the
ventilation cover as shown in the figure.
11 / 21 EN
Publicité
