Pentair Flotec CLEAROX 9/12 Manuel D'utilisation Et D'entretien page 13

EN
USE AND MAINTENANCE MANUAL
CHAPTER 3
Technical data
TECHNICAL DATA
Mains voltage / Frequency
Absorbed power
Type of protection / Insulation class
Delivery fitting
Maximum flow rate
Maximum head
Maximum depth of immersion
Power cable
Weight
Maximum dimension of pumped solid particles
Maximum temperature of the pumped fluid (in continuous mode)
Maximum number of starts per hour (uniformly distributed)
Minimum priming level
Minimum suction level (manual mode)
Start level (automatic mode)
Stop level (automatic mode)
Sound pressure level (Lpa) equal to or less than 70 dB(A)
Sound emission values obtained in conformity with the EN 12639 standard
Motors used in these products are exempted from efficiency requirement in accordance with Article 2.2 (a) of the
Regulation (EU) 2019/1781
The maximum flow rates given are reached if the pump is used without the check valve supplied.
In outdoor fountains, garden ponds and similar places the pump is to be supplied through a residual current device
(RCD) having a rated residual operating current not exceeding 30mA.
11
CLEAROX 9/12
230V ~ 50 Hz
700 Watt
IP X8 / B
41,90 mm (1"1/4 F)
12.000 l/h
9 m
7 m
10 m H07 RN8-F
5.8 Kg
10 mm
35° C
30
21 mm
2 mm
510 mm
175 mm
CLEAROX 11/18
230 V ~ 50 Hz
1.100 Watt
IP X8 / B
41,90 mm (1"1/4 F)
18.000 l/h
11 m
7 m
10 m H07 RN8-F
6.9 Kg
10 mm
35° C
30
21 mm
2 mm
510 mm
175 mm