Certificates And Approvals; Ec Conformity (Ce Marking); Din 3440; Ul/Cul Approval - PMA KS 98-1 Mode D'emploi

9499-040-44318
12.

Certificates and approvals

12.1

EC conformity (CE marking)

The unit complies with the following European guidelines:
Electromagnetic compatibility (EMC): 89/336/EEC (as amended by 93/97/EEC)
q
Electrical apparatus (low-voltage guideline): 73/23/EEC (as amended by 93/68/EEC).
q
Evidence of conformity is provided by compliance with standard EN 61326-1 and EN 61010-1
12.2

DIN 3440

The unit may be used as a "facility for temperature control and limiting for heat generation plants"
according to DIN3440 (1984-07) (register number TR111403).
12.3

UL/cUL approval

(Type 1, indoor use, File: E208286)
In order for the unit to comply with the requirements for UL approval, the following points must be
taken into account:
Use only copper (Cu) wires for 60/75 °C ambient temperature.
q
The connecting terminals are designed for 0,5 - 2,5 mm
q
The screw terminals must be tightened with a torque of 0,5 - 0,6 Nm.
q
The unit must be mounted in the plane surface of a "type 1" housing and operated exclusively in
q
"indoor" applications.
Maximum ambient temperature: 50 °C
q
Maximum relay contact rating:
q
250 VAC, 2 A, 500 VA (resistive load)
250 VAC, 2 A, 360 VA (inductive load)
With inductive load, RC protective circuitry must be provided !
Cu cross sections.
2
53
Certificates and approvals
EC conformity (CE marking)