Description; Construction; Important Technical Data; Analog Inputs - PMA KS 98-1 Mode D'emploi

Description

2.
Description
2.1

Construction

HARDWARE
INP3
INP4
di8
Option C
di9
di10
di11
di12
di3
di4
Option B
di5
di6
di7
INP1
INP5
Standard
INP6
di1
di2
Dependent on version, the basic unit (standard) contains analog and digital outputs as well as re-
lays. Communication with other instruments and systems is possible via an optional serial interface
(option B).
Additional inputs and outputs are available either with option C (as shown) or with "modular option
C", which provides four sockets for various I/O modules.
The instrument is a compact automation unit the function of which can be configured freely by me-
ans of function blocks. Each unit contains a comprehensive function library for selection, configurati-
on, parameter setting and connection of max. 450 function blocks by means of an engineering tool.
I.e. complex mathematical calculations, multi-channel control structures and sequence controllers
can be realized in a single unit.
Indication of various operating pages with max. 10 lines is via an LCD matrix display (160 x 80 dots):
e.g. numeric input and output of analog and digital signals, values and parameters as well as
full-graphic display of bargraphs, controllers, programmers and trends. Display colour red / green
and direct / inverse display can be switched over dependent on events, or by operation (enginee-
ring).
3.

Important technical data

3.1 Analog inputs r sections 7.7. and 25
INP 1: Universal input, configurable for thermocouple, resistance thermometer, temperature differen-
ce, res. transducer, direct current and -voltage.
Construction
SOFTWARE / ENGINEERING
1
2 3 4
KS 98-1 advanced
32
9499-040-44318
HARDWARE
OUT3
Option C
do5
do6
do1
do2
Option B
do3
do4
Interface
OUT1
OUT2
Standard
OUT4
OUT5