Sicce Syncra SDC 6.0 Manuel D'instructions page 17

LOSS OF WI-FI CONNECTION AND CONTROLLER RESET
In case Wi-Fi connection is lost, the pump will continue working and the user will receive a notification via email if this warning has been activated in the App
CONTRALL.The connection will be restored automatically as soon as the wireless network is available again.
WIFI AND CONTROLLER RESET
Remove power from the controller. Press and hold down the "+" and "-" buttons at the same time and re-power the controller. Keep them pressed until the
Wi-FiI LED flashes quickly. Release the buttons. After about 20 seconds the Wi-Fi symbol will start blinking slowly to indicate that it is ready and waiting for
configuration.
VOICE COMMANDS
Voice commands can be activated via Siri - Google assistant - Alexa
- POWER ON
- SHUTDOWN
- TEMPERATURE CONTROL
- READING OF THE ALERT IN CASE IT IS ACTIVATED
- PRESET CHANGE OF FLOW AND PUMP POWER - (REDUCE 10% / INCREASE 10%)
COMPATIBLE WITH:
- Apple Watch (iOS)
- Smartwatch (Android)
SYNCRA SDC · 6.0 · 7.0 · 9.0 INSTRUCTION MANUAL · EN
INDEX