Costway FP10346 Mode D'emploi page 4

1.2 Install the window sealing plate assembly
1) Half open the window, and mount the window sealing
plate assembly to the window (as shown in Fig.2 and
Fig.3); the assembly can be placed in horizontal and
vertical direction.
2) Pull various components of the window sealing plate
assembly open, adjust their opening distance to bring
both ends of the assembly into contact with the window
frame, and fix various components of the assembly.
1.3 Install the body 1) Move the machine with installed
pipe and fittings to the window, and the distance
between the body and walls or other objects shall be
least 50cm/20" (as shown in Fig.4).
2) Elongate the exhaust pipe and snap the flat end of the
exhaust pipe joints into the hole of the window sealing
plate assembly (as shown in Fig.5 and Fig.6)
Notes:
1. The flat end of the exhaust pipe joints must be
snapped into place.
2. The pipe cannot be distorted nor has substantial
turning (more than 45 °).
Keep the ventilation of the exhaust pipe not blocked.
08
Fig.4
Fig.5
Important Notice
The length of the exhaust hose shall be 280mm-1500mm
/ 11"-59", and this length is based on the specifications of
the air conditioning. Do not use extension tubes or
replace it with other different hoses, or this may cause a
malfunction. Exhaust host must be not blocked;
otherwise it may cause overheating.
Control Panel Setting
I. Operating instructions:
LED Control Panel is as follows:
1. Power Key 2. Mode Selection Key
. Fan Speed Selection Key . Timer Key
Fig.6
. Down Key . Up Key
. Sleep Key
09