Télécharger Imprimer la page

Napoleon Element NEFB42H-BS Manuel D'installation Et D'opération page 6

Masquer les pouces Voir aussi pour Element NEFB42H-BS:

Publicité

Les langues disponibles

Les langues disponibles

general information
EN
1.3
listing approvals
This appliance has been tested in accordance with the CSA Standards for fi xed and location-dedicated electric
room appliances in the United States and Canada. If you need assistance during installation, please contact your
local dealer.
note:
This appliance must be electrically wired and
grounded in accordance with local codes or,
in the absence of local codes, with the latest
edition of the National Electrical Code ANSI/
NFPA 70 in the United States or the Canadian
Electrical Code CSA C22.1 in Canada.
1.4
general instructions
Prior to plugging your appliance into an electrical outlet, verify that the house circuit breakers for the outlet
are on.
The appliance may emit a slight, harmless odour when fi rst used. This odour is normal and it is caused by
the initial heating of internal appliance elements and will not occur again.
If your appliance does not emit heat when called for, consult the "operation" section of this manual for further
information.
Use with a CSA or UL certifi ed surge protector.
Do not route the power cord directly underneath the appliance.
This electric appliance meets the construction and safety standards of H.U.D. for application in manufactured
homes when installed according to these instructions.
As with most electronic devices, your new electric appliance has been designed to operate at temperatures
between 5°C (41°F) and 35° C (95°F). During the colder winter months, allow the appliance to reach room
temperature before turning it on.
1.5
unpacking and testing appliance
Carefully remove the appliance from the box. Prior to installing the appliance, remove all packaging material and
test to make sure the appliance operates properly by plugging the power supply cord into a conveniently located
120V, 15 Amp minimum grounded outlet.
note:
The appliance is factory wired for 120
volt power supply. If 240 volt operation
is required, see "electrical information"
section.
Exact packaging location may vary.
Some packaging has been hidden for
clarity.
6
W415-4035 / 03.23.22
Remote &
Hardware Kit
(packaged on bottom
of appliance)
Model No.
Description
Voltage
Watts
Amps
Dedicated 15 AMP Grounded Circuit
Appliance Width
Appliance Height
Appliance Depth
Net Weight
Gross Weight
Outer Box
NEFB42H-BS
42" Electric Appliance
120V / 240V
1500 / 3000W
42 1/8" (1070mm)
31 7/8" (810mm)
14" (356mm)
87.9lbs (39.9kg)
106.9lbs (48.5kg)
Manual
(packaged on
top of appliance)
Brick Panels
(packaged at back
of appliance)

Publicité

loading