Grammer MSG95 Instructions De Montage page 23

1
2
1
2
* if fitted ** optional extra
GB
Seat functions and operation
Weight adjustment
The seat must be adjusted for the driver's
weight with the driver sitting on the seat. The
adjustment is made by pulling out or pushing
in the actuator lever (1) until the green
marking is visible in the weight-and-height
indicator (2).
setting for the driver's weight must be
checked and adjusted as necessary before
the vehicle is driven.
Height adjustment
The seat height can be altered by fully pulling
out or pressing in the actuator lever (1).
height indicator (2) must be visible.
operate compressor for more than 1 minute.
Seat pan angle adjustment *
The angle of the seat pan can be individually
adjusted.
To adjust the angle of the seat pan, pull the
left handle upwards. By exerting pressure on
or off the front or rear part of the seat pan it
can be moved to the desired angle position.
*** depending on model
To prevent damage to the health, the
The green marking in the weight-and-
In order to avoid damage, do not
23