Publicité
Les langues disponibles
Les langues disponibles
extinguisher, dry powder extinguisher, or fire
sand to extinguish the fire.
Use the original or specified battery charger.
Incorrect charging methods and chargers may
damage the battery and cause it to catch fire or
other problems.
Do not charge the battery with a faulty
charger.
Please stop charging after reaching the
specified charging time, otherwise the battery
may heat up, explode or catch fire.
Waste Battery Disposal Requirements:
Batteries are toxic and hazardous. Dispose
of waste batteries according to the applicable
national laws, regulations and standards.
Fire Prevention
No naked flame sources, such as lighted
candles, should be placed on the device.
For the device with ventilation openings, the
ventilation openings should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloths, and curtains.
The openings shall never be blocked by placing
the device on a bed, sofa, rug, or other similar
surface.
Hot Surface
CAUTION: Hot parts! Do not touch. Burned
fingers when handling the parts. Wait one-half
hour after switching off before handling the
parts.
Power Supply
Input voltage should meet the Limited Power
Source (36 VDC, 24 VAC, PoE 42.5~57 V)
according to the IEC62368 standard. Please
refer to technical specifications for detailed
information.
Make sure the plug is properly connected to
the power socket.
DO NOT connect multiple devices to one
power adapter, to avoid over-heating or fire
hazards caused by overload.
+ identifies the positive terminal(s) of
equipment which is used with, or generates
direct current. - identifies the negative
terminal(s) of equipment which is used with, or
generates direct current.
Light Illuminator
CAUTION: Possibly hazardous optical
radiation emitted from this product. DO NOT
stare at operating lamp. May be harmful to the
eyes.
The beam of the light at the distance of 200
mm is classified as Risk Group 2 (RG2).
Wear appropriate eye protection or DO NOT
turn on the white light when you assemble,
install or maintain the camera.
If appropriate shielding or eye protection is
not available, turn on the light only at a safe
distance or in the area that is not directly
exposed to the light when installing or
maintaining the device.
Installation
Install the device according to the
instructions in this manual.
To prevent injury, this device must be
securely attached to the installation surface in
accordance with the installation instructions.
Never place the equipment in an unstable
location. The equipment may fall, causing
serious personal injury or death.
This equipment is for use only with
corresponding brackets. Use with other (carts,
stands, or carriers) may result in instability
causing injury.
System Security
Please understand that you have the
responsibility to configure all the passwords
and other security settings about the device,
and keep your user name and password.
Maintenance
If the product does not work properly, please
contact your dealer or the nearest service
center. We shall not assume any responsibility
for problems caused by unauthorized repair or
maintenance.
A few device components (e.g., electrolytic
capacitor) require regular replacement. The
average lifespan varies, so periodic checking is
recommended. Contact your dealer for details.
Wipe the device gently with a clean cloth and
a small quantity of ethanol, if necessary.
If the equipment is used in a manner not
specified by the manufacturer, the protection
provided by the device may be impaired.
Using Environment
Make sure the running environment meets
the requirement of the device. The operating
temperature shall be -40 °C to 70 °C (-40 °F to
158 °F), and the operating humidity shall be
less than 90%.
DO NOT aim the lens at the sun or any other
bright light.
DO NOT expose the device to high
electromagnetic radiation.
Emergency
Make sure that the power has been
disconnected before you wire, install, or
9
Publicité
