Bosch GCM 254 D Professional Notice Originale page 33

Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Locking screw for slide device
(2) Slide device
(3) Laser warning label
(4) Transport handle
(5) Handle
(6) Lock-off function for On/Off switch
(7) Protective guard
(8) Retracting blade guard
(9) Mounting holes
(10) Insert plate
(11) Lock button for mitre angle
(12) Locking knob for all mitre angles
(13) Lock button for bevel angle
(14) Angle indicator for mitre angles
(15) Detents for standard mitre angles
(16) Saw table extension
(17) Workpiece support a)
(18) Fixed fence
(19) Adjustable fence
(20) Screw clamp
(21) Adjustment knob for 0° bevel angle
(22) Depth stop
(23) Depth stop adjusting screw
(24) Hex key
(25) Transport Safety Lock
(26) Length stop
(27) Recessed handles
(28) Mounting holes for horizontal fixing
(29) Saw table
(30) Scale for mitre angles
(31) Tilt protector
(32) Guide roller
(33) Spindle lock
(34) Laser beam outlet aperture
(35) On/off switch
(36) On/Off switch for laser (cutting line indication)
(37) Chip ejector
(38) Wing bolt for fixing the adjustable fence
(39) Holes for screw clamp
(40) Stop screw for right-hand bevel angle range
(41) Standard bevel angle stops 45°, 22.5° and 33.9°
(42) Clamping screw for saw table extension
(43) Securing screw for saw table extension
(44) Opening for workpiece support (on power tool)
Bosch Power Tools
(45) Opening for second workpiece support (on work-
piece support)
(46) Dust bag
(47) Hex socket screw for mounting the saw blade
(48) Clamping flange
(49) Saw blade
(50) Inner clamping flange
(51) Wing bolt for adjusting the height of the threaded
rod
(52) Threaded rod
(53) Wing bolt for screw clamp
(54) Screw clamp pins
(55) Angle indicator for bevel angles
(56) Scale for bevel angles
(57) Clamping screw for length stop
(58) Guide rail for length gauge
(59) Wing bolt for fixing the guide rail for length gauge
(60) Screws for insert plate
(61) Set screw for positioning the laser
(62) Set square
(63) Stop screw for 0° bevel angle
(64) Hex socket screw for fence
(65) Screw for bevel angle indicator
(66) Screw for mitre angle indicator
a) Not available in all country-specific versions.
Technical Data
Sliding Mitre Saw
Article number
Rated power input
No-load speed
Laser type
Laser class
Weight
Protection class
Dimensions of suitable saw blades
Saw blade diameter
Base blade thickness
Max. cutting width
Hole diameter
Permitted workpiece dimensions (maximum/minimum): (see "Per-
missible workpiece dimensions", page 38)
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
The appliance meets IEC 61000-3-11 requirements and is subject to
conditional connection. The appliance can lead to occasional voltage
fluctuations under unfavorable power conditions. The impedance of
this appliance is set as Z = 0.094 Ω. The user must make sure,
actual
English | 33
GCM 254 D
3 601 M53 0..
W 1800
min –1 4800
nm 650
mW < 1
2
kg 17.9
/ II
mm 254
mm 1.4–2.5
mm 3
mm 30
1 609 92A 9G4 | (18.01.2024)