emerio PAC-127032.1 Mode D'emploi page 9

boards to the desired length fitting your window; screw on the washer and then the butterfly nut above to fix the
connection of boards.

Connect the exhaust hose onto the window kit by inserting the window kit adaptor into its place on board A.

Close your window to secure the window kit in place. It is recommended that the gap between the window kit and
the sides of window should be sealed off for a maximum efficiency.

Attach the hose connector onto the air exhaust outlet at the back of the unit.

Adjust the length of the flexible exhaust hose, avoiding bends in the hose. Place the appliance near an appropriate
electrical outlet.
- 8 -