Publicité
Les langues disponibles
Les langues disponibles
To change the timer, press the timer button and press the button "
set to 0 hour ("00"), the timer will be canceled and the timer-ON indicator light will turn off.
6. Sleep button (only active in cooling mode)
Press the sleep button to activate the sleep mode. The sleep indicator light turns on.
In sleep mode, the appliance automatically runs in low fan speed which cannot be changed.
7. Child lock button
Long press the child lock button until the child lock indicator light turns on, and the appliance will be
locked for its current setting. Long press the child lock button again, the locking will be cancelled, and the
child lock indicator light turns off. You can then set the appliance by the control panel again.
NOTE:
To Shift the temperature unit between Celsius and Fahrenheit, long press the mode button for 5 seconds
when the appliance is on, or simply press the ℃/℉ conversion button on the remote control, or you
can set it by the APP control.
Automatic defrost
At low room temperature, frost may build up at the evaporator when the appliance is running. The appliance
will automatically start defrost in below process:
When the appliance is cooling or drying mode, the ambient temperature sensor senses the evaporator coil
temperature is below -1℃， the compressor will stop operating for 10 minutes and when the coil temperature
rises up to 7℃, the appliance restart in the cooling or drying mode.
Drain water
1) There is condensing water recycling hidden in this appliance. The condensing water is partly kept
recycling between the condenser and the water tray. When the water level rises to the upper level, the
water-full code "Ft" will be shown on the digital display to remind of draining water.
Note: The appliance has two drain ports. When the upper drain port is blocked by the stopper, the water
will flow out from the lower drain port.
2) Please cut off the power supply, move the appliance to a suitable place, pull out the stopper in the drain
port to drain the water completely.
3) After the draining, insert back the stopper to the drain port, otherwise the appliance may leak and make
your room wet.
4) For continuous use of the drying mode, connect the provided drain hose to the upper drain port and
drain water into a bucket.
Wi-Fi connection guide (The guide for the APP may not be updated regularly due to software version
upgrade or other reasons. This instruction is used as a guide only.):
1. Place the appliance within 5 meters to your router.
2. Search "Smart Life – Smart Living" in App Store (for iOS) or Google play (for Android), or directly scan the
QR code below, to download the application "Smart Life".
"/"
- 10 -
" to change the value, when it is
Publicité
