Mitsubishi Heavy Industries SRK20ZMX-S Manuel De L'utilisateur page 7

Name of each part and its function
Unit display section
Unit ON/OFF button
This button can be used for turning on/off the unit when re-
mote control is not available.
Remote control signal receiver
3D AUTO light (green)
Illuminates during 3D AUTO operation.
HI POWER light (green)
Illuminates during HIGH POWER operation.
Accessories
Wireless remote control
• Do not touch the air inlet panel while it is operating.
The air inlet panel opens up while the system is operating.
Please do not install the unit in a fashion in which the air inlet
panel cannot open or place objects near the indoor unit.
NOTE
•
Buzzer sound for remote control
When preset temperature 24°C, automatic operation and automatic airflow are selected, the buzzer sound (PiPi) is produced.
When turning off the air conditioner by pressing ON/OFF button (except CLEAN mode), the buzzer sound (Pi) is produced.
This function is useful for operating the air conditioner in the darkness.
Air flow setting
Page 6
Allergen clear filter
Photocatalytic washable
Wireless remote
control holder deodorizing filter (Orange)
CAUTION
(Light orange)
(R03 (AAA, Micro) ×2)
Wood screw (Quantity:2)
(for remote control holder mounting)
Preset temperature
– 5 –
RUN (HOT KEEP) light (green/blue)
• Illuminates during operation.
green : except ECONO operation
blue : ECONO operation
• Blinks when airflow stops due to the 'HOT
KEEP', 'CLEAN operation'and 'operation
mode invalid'.
1.5 sec.
ON
HOT KEEP
OFF
0.5 sec.
3 sec.
ON
CLEAN
operation
OFF
1 sec.
Page 22
0.5 sec.
ON
Operation
mode
OFF
invalid
0.5 sec.
Page 28
TIMER light (yellow)
Illuminates during TIMER operation.
Battery