Publicité
Les langues disponibles
Les langues disponibles
OSC005 Dust Extraction Hood
(Optional Attachment)
• This dust extraction hood attachment
is only for use when sanding. It is not
designed for use when cutting, scraping
or grinding.
Do not use dust kit
without vacuum cleaner.
CAM LEVER
DUST
EXTRACTION
HOOD
RUBBER BACKING
PAD
SANDING SHEET
CONNECTING THE DUST
EXTRACTION HOOD
1. Before attaching the dust extraction
hood, remove any accessory that is
attached to the tool.
2. Position the dust extraction hood onto
the tool over the accessory attachment
area.
3. Turn the cam lever to secure the dust
extraction hood onto the tool.
4. Attach the rubber backing pad and
sanding sheet (sold separately) to
prepare for sanding.
5. Connect the vacuum cleaner hose to the
dust extraction tube. Note:
16099221RZ_GOP18V-34_202303.indd 20
16099221RZ_GOP18V-34_202303.indd 20
Attachments
material being worked. When vacuuming
dry dust that is especially detrimental to
health or carcinogenic, use a vacuum
cleaner that is specifically intended for
that purpose.
- Bosch VH-series hoses - The VX120 hose
adapter is required (included with VH-
series hoses).
- Other 35mm and 22mm hoses, such as
the Bosch VAC-series hoses - Connect
hose directly to the tool.
- Common 1-1/4" or 1-1/2" hoses - The
Bosch VAC024 adapter is required.
6. Connect the vacuum hose to a vacuum
cleaner.
The oscillating tool is now ready for
sanding while using a vacuum cleaner or
dust extractor.
-20-
T h e v a cu u m cle a n e r
must be suitable for the
BOSCH VH-SERIES
HOSE
VX120
BOSCH VAC-
SERIES HOSE
1-1/4" OR
1-1/2" HOSE
VAC024
3/17/2023 8:22:00 AM
3/17/2023 8:22:00 AM
Publicité
