Siemens 9001071760 Notice D'utilisation page 14

Congratulations on purchasing this Siemens appliance. You have acquired a top-quality product, which will
give you a lot of enjoyment.
Please read this installation and operating instruction manual carefully, then act accordingly! Store for
future reference.
Operating instructions
Getting to know your appliance
The electronic continuous-flow heater is intended exclusively for heating water which flows through the
appliance.
The continuous-flow heater switches on and heats the water when the warm water tap is opened. It switches
off as soon as the tap is closed.
Operating the appliance
The default temperature for the water temperature after the first start-up or a power failure is 40 °C.
14
en
Selecting shower temperature
Select the required temperature with the rotary knob used to vary
the desired temperature from 20 °C to 60 °C in steps of 0.5 °C.
The coloured display lighting indicates the temperature range dur-
ing operation by means of blue or red hues.
Info: The temperature shown in the display is the water tempera-
ture inside the appliance. The temperature of the water leaving
the tap can vary from this due to heat losses in the pipework.