Assembling The Trap - Biogents BG-Mosquitaire Manuel D'instruction

Contents Included in the Packaging
1. Intake funnel
2. Funnel net
3. Catch bag (2x)
Preassembled body
4. Gauze covering
5. Top part of lid
6. Bottom part of lid
7. Trap body
8. Inner tube with ventilator
9. 12 V outdoor power supply (EU version with 8 meter cable)
10. Biogents Sweetscent™ (BG-Sweetscent™)

Assembling the Trap

1. Open the BG-Sweetscent package and remove the white
BG-Sweetscent pouch [F1]. Place the BG-Sweetscent
into the black slot located on the inside wall of the inner
tube [F2].
2. Place the funnel net (2) around the bottom of the intake
funnel (1) [F3]. Then place the catch bag (3) over the
funnel net (2). Tighten the top part of the catch bag (3)
about 2 cm below the top of the funnel net (2) [F4].
3. Insert the intake funnel with the attached funnel net and
catch bag [F4] into the opening on top of the lid [F5].
4. Plug the outdoor power transformer (9) into a water safe
outlet [F6].
5 4 8
F1
1
2
F3
F5
1
2
3
6
7
9
10
F2
1
2
3
F4
F6
EN 3