SPIDO GC-1200I-50H5 Mode D'emploi Original page 15

FEATURES / DETAILS
Suction line
1
Suction filter
2
Non-return valve (x2)
3A 3B
Pressure line
4
Shut-off cock
5
Suction port
6
Pressure port
7
Filling opening for water
8
Drain screw for water
9
Pump housing
10
Terminal box
11
Armoured hose
12
Pressure switch
13
Pressure gauge
14
Pressure tank
15
Tank valve with protective cap
16
HMT : Max. delivery height.
HA : Suction head (between the surface of water and the pump)
HI : Difference between surface of the liquid to be pumped and
entrance of the suction line (min 0.3m)
Please read through these operating instructions
carefully to make sure that you can fully benefit from
all features.
TABLE OF CONTENTS
1. General safety information
2. Technical Data
3. Range of use
4. Scope of delivery
5. Installation
6. Electrical connection
7. Putting into operation
8. Setting the pressure switch
9. Operating the pump with a SPIDO prefilter
10. Maintenance and troubleshooting
11. Warranty - Service
GB