Télécharger Imprimer la page

JB Systems SM-1612 SCANMASTER Mode D'emploi page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
ENGLISH
 Never let the power-cord come into contact with other cables!
 In order to avoid a hazard, the unit shall only be used with the AC-adaptor delivered
with it. If the AC-adaptor is damaged, a same model adaptor shall be used only.
 In order to prevent electric shock, do not open the cover. Apart from the mains fuse
there are no user serviceable parts inside.
 Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with
a fuse of the same type and electrical specifications!
 In the event of serious operating problems, stop using the appliance and contact
your dealer immediately.
 Please use the original packing when the device is to be transported.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Some words explained:
 SCENE: A scene is a set of different fader values that describes a certain condition
at a given moment.
Example: You have set the faders on the SM-1612 to put a fixture in a certain
direction, with a certain gobo and a certain color. The combination of these different
fader values is called "SCENE"
 BANK: On the SM-1612 there are 8 scene buttons. Under each scene button a
scene can be stored. To have a total of 240 scene memories you need to put these
scenes in banks. That is why you have 30 banks with each 8 scenes: 30 x 8 = 240
scenes.
Example:
BANK1
BANK2
BANK3
...
BANK30
 CHASE: On the SM-1612 there are 6 programmable chases. A chase is a
succession of scenes. This succession of scenes can be programmed by the user in
any order. One chase contains a maximum of 240 scenes.
 SPEED: time between 2 scenes in a chase running in automatic mode.
 FADE TIME: This is the amount of time it takes for a fixture (or fixtures) to move from
one place to another.
 PAN/TILT: PAN means moving horizontally or moving on the X-axis.
TILT means moving vertically or moving on the Y-axis.
JB SYSTEMS®
(scene1 ; scene2 ; scene3 ; ... scene8)
(scene1 ; scene2 ; scene3 ; ... scene8)
(scene1 ; scene2 ; scene3 ; ... scene8)
(scene1 ; scene2 ; scene3 ; ... scene8)
3/89
OPERATION MANUAL
SM-1612 SCANMASTER

Publicité

loading