JB Systems SM-1612 SCANMASTER Mode D'emploi page 16

ENGLISH
The display shows "TRANSMIT" to indicate that the SM-1612 is ready to send.
2. Prepare to receive file dump: these actions have to be carried out on the
Scanmaster that has will receive the file dump.
a. Turn the power off.
b. Press the following buttons at the same time and hold down while you turn on
the power:
The display shows "RECEIVE" to indicate that the SM-1612 is ready to receive.
3. Start sending file dump:
On the Scanmaster showing "TRANSMIT" on its display, press the scene buttons 7
and 8 at the same time.
The display shows a small progression bar. Don't touch both Scanmasters during
this operation. At the end of the operation both units will automatically return to
normal.
Before you start using the unit that received the file dump, switch it off and on!
MAINTENANCE
Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water
inside the unit. Do not use volatile liquids such as benzene or thinner which will
damage the unit.
SPECIFICATIONS
This unit is radio-interference suppressed. This product meets the requirements of the
current European and national guidelines. Conformity has been established and the
relevant statements and documents have been deposited by the manufacturer.
Power Input:
AC/DC Power adapter:
DMX outputs:
Midi input:
Audio input:
Size:
Weight:
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website:
JB SYSTEMS®
 Fixture8 button
 Fixture9 button
 Scene2 button
www.jb-systems.eu
DC 9 ~ 12V 300mA minimum.
AC 240V, 50Hz  12Vdc / 300mA
3pin XLR; DMX, channels 001  192
5pin Din
Cinch 0.1V ~ 1Vpp
48.3 x 13.4 x 8.5cm (19" / 3U)
2.7kg
14/89 SM-1612 SCANMASTER
OPERATION MANUAL