EMAK GS 371 Manuel D'utilisation Et D'entretien page 40

11. DECLARATION OF CONFORMITY
The undersigned,
I
declares under its own responsibility that the machine:
GB
1. Type:
2. Trademark: / Type:
F
D
3. serial identification
E complies with the provisions of the
Directive / Regulation and subsequent
amendments or additions:
NL
conforms with the provisions of the
following harmonized standards:
GB
conforms with the model that was
awarded EC certification No.
GR
released from
TR
Conformity assessment procedure
followed
CZ
Measured sound power level
SK
Guaranteed sound power level:
RUS
Made at:
UK
Date:
Technical documentation available by:
PL
H
LV
EST
LT
RO
40
EMAK spa via Fermi, 4 - 42011 Bagnolo in Piano (RE) ITALY
Chainsaw
OLEO-MAC GS 371 - GS 411 - GS 451 / EFCO MT 3710 - MT
4110 - MT 4510
852 XXX 0001 - 852 XXX 9999 (GS 371 - MT 3710)
848 XXX 0001 - 848 XXX 9999 (GS 411 - MT 4110)
844 XXX 0001 - 844 XXX 9999 (GS 451 - MT 4510)
2006/42/EC - 2014/30/EU - 2000/14/EC - (EU) 2016/1628 -
2011/65/EU
EN ISO 11681-1:2011- EN 55012:2007 - EN 55012:2007/A1:2009 -
EN ISO 14982:2009
M.0303.18.6017 (GS 371) - M.0303.18.6018 (GS 411)
M.0303.18.6019 (GS 451) - M.0303.18.6020 (MT 3710)
M.0303.18.6021 (MT 4110) - M.0303.18.6022 (MT 4510)
ICE v. Garibaldi, 20 - 40011 Anzola Emilia (BO) - Italy n° 0303
Annex V - 2000/14/EC
110.9 dB(A) (GS 371 - MT 3710) - 111.2 dB(A) (GS 411 - MT 4110) -
114.0 dB(A) (GS 451 - MT 4510)
114.0 dB(A) (GS 371 - MT 3710 - GS 411 - MT 4110) - 117.0 dB(A) (GS
451 - MT 4510)
Bagnolo in piano (RE) Italy - via Fermi, 4
20/07/2019
the administrative headquarter. - Technical Department
Fausto Bellamico - President
s.p.a.