Poulan Pro PP28PDT Manuel D'instructions page 11

3. Position the lower shoulder strap clamp
under the upper shaft and align the upper
and lower clamp screw holes.
POWERHEAD
END
Lower Shoulder
Strap Clamp
4. Insert two screws into the screw holes.
5. Secure shoulder strap clamp by tighten-
ing screws with a hex wrench.
Upper Shoulder
Strap Clamp
ATTACHMENT
END
Screws
ADJUSTING THE ASSIST HANDLE
CAUTION: When attaching the assist
handle, be sure it remains between the ar-
rows on the shaft.
1. Position the handle between the 2 arrows
on the shaft.
2. Rotate the handle on the shaft to an up-
right position.
3. Fit the screw and wing nut.
4. Tighten wing nut.
Wing nut
Shaft
11
Handle
Bolt