hestan KRTS Serie Mode D'emploi page 20

Les langues disponibles

SMART BURNER

(CONTINUED)

PAIRING WITH THE COOKTOP

See the KNOB / COOKWARE SETUP section on page 19 for details.

NON-CUE COOKWARE

Traditional cookware may be used on the Smart Burner

, but only in Manual Mode. See

COOKWARE RECOMMENDATIONS on page 15 for details.

UPDATES

You may need to update the firmware on your cooktop and cookware. The Smart Burner

system

will routinely check for updates using the on-board WiFi connections if the system has been enabled.

This will ensure proper functionality as well as introduce new features when available. Proper setup

of the WiFi is required to enable this feature.

Hestan Cue cookware can be updated by downloading and connecting your cookware to the Hestan

Cue application. This will require the user to open the app periodically to connect to the pan and

check for updates. However, this is not required to use the cookware.

THERMOSTATIC COOKING CONTROL MODE

Once cookware is connected, desired temperature can be set through the control knob interface.

Once temperature is reached, the smart system will modulate the flame to maintain set point. This

set point can be changed at any time by rotating the knob. See OPERATION - THERMOSTATIC

MODE on page 24 for details.

•

Errors that occur while connected to the Smart Burner

will appear on the knob display.