SEVERIN TKS 8846 Mode D'emploi page 28

Change freezer door hinge
1. Unscrew the bottom door bracket from the
side panel and remove the freezer compart-
ment door from the bottom.
2. Unscrew the door latch from the side panel
and reattach it on the opposite side.
3. Remove the filler plug and the journal from
the door.
4. Insert the journal into the hole on the top
left of the door. Insert the filler plug in the
upper right corner.
5. Now place the door against the freezer so
that the journal slides into the designated
bore.
6. Hold the door in position and screw the
lower bracket on the left side onto the side
panel.
Details for After-Sales Service
If a repair is necessary, please contact the
service hotline directly with an explanation of
the defect.
Before you do that, write down the article
number from the rating label on the appli-
ance (see figure), since this is needed for the
smooth processing of your request.
- 28 -