Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
Note!
A safety hose may not be bent and must not come into contact with moving parts of
▷
kitchen units.
The connection tap for the appliance must always be positioned such that it is easily
▷
accessible.
▷
The type of gas and the country for which the appliance has been designed are shown
on the appliance identification card.
Before using the appliance for the first time, check the connections using water
and washing-up liquid to ensure that there are no gas leaks.
Electrical connection
230 V~ / 50/60Hz
The electrical connection must comply with national and local regulations. For the
Netherlands this includes the NEN 1010 amongst other standards.
•
The wall plug socket and plug should always be accessible.
•
Make sure that the cable does not come into contact with parts of the oven that may
become hot.
•
If you want to make a fixed connection, make sure that an omnipolar switch with a contact
separation of at least 3 mm is fitted in the supply cable.
•
The appliance should not be connected to the mains via a multiplug adapter or extension
cable, as the safe use of the equipment cannot be guaranteed.
Installation
•
When placing the cooker next to a tall cupboard or another wall made of flammable material,
keep at least 50 mm distance between the cooker and the walls.
•
Also keep a minimum distance of 650 mm between the hob and any cooker hood placed
above the cooker.
•
If you place the cooker in a kitchen unit, the minimum space must be adhered to.
•
If the cooker is built in between kitchen cabinets, the lining of the units must be able to
withstand temperatures up to 90 °C.
EN 21
Publicité
