Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Operating the hob
1. Push in the control knob and turn it to the left to the high setting.
The burner will ignite.
The control knob should be pushed in and held for about 10 seconds because of the
▷
flame safeguard.
▷
The gas flame can be smoothly adjusted from high to low. If the burner fails to light after
repeated attempts, check to ensure that the burner cap is properly positioned.
In case the flames are accidentally put out, turn the knob to the "off" position, wait for
60 seconds and re-ignite the burner again as described.
If the burner fails to ignite or doesn't stay on, check that:
•
the burner cap and burner ring are seated correctly in the burner housing;
•
the burner/spark plug and thermocouple are clean and dry.
0 position
High setting
Low setting
Burner zone
Ac: Burner spark plug
Tc: thermocouple
EN 15
Publicité
